Scientific and Production Company VMPAUTO

 

Labria 1 (mineral base)

Back

Rate product:

    976

     

    Labria 1 (mineral base) 

    ADVANTAGES:

    • High lubricating properties
    • Resitant to  bacterial or microbal injury
    • Non-toxic and safe

    How it works

    Water diluted Cutting Fluid
    The Cutting Fluid is supplied in the form of concentrated product that  represents transparent low viscosity  oily fluid brown colour. By mixing with water it becomes white emulsion.
     
    LABRIA can be used for most of machining processes:
    • turning, screw-cutting, drilling, boring;
    • milling, gear cutting, broach;
    • grinding; 
    • nonferrous metal rolling, drawing, etc. 

    It is recommended for processing of cast iron, steel, (as well as titanic, chromed, stainless steel and high-alloy), aluminum alloy, and nonferrous alloy.

     

    EQUIPMENT FOR LABRIA PRODUCTION

    MIXER "VENTURI UNIT"

    This mixer is used for continuous production of fine and homogeneous cutting fluid LABRIA-1.

    By use of this equipment we can easily avoid traditional problems, which we usually have by manual production of emulsion: considerable variation in concentration, long time of production process, dirty working place.

    The main element of this mixer is the tube VENTURI. In diffusion apparatus of this tube Cutting Fluid effectively emulsifies in the water.

    The mixer is needed to be connected to water refill system. Necessary concentration can be fixed by pressure control and special quick-detachable nozzles.

     

     CHARACTERISTICS OF THE MIXER "VENTURI UNIT"

    Concentration range Water pressure Performance under pressure 4 bar Weight, kg Main material Dimension, mm
    from 0,5 % to 0,7 % from 1 to 4 бар 520 kg/hour 6,3 plastic 420х415х290

     

    REFRACTOMETER  

    This is a multipurpose auxiliary equipment for easy and quick definition of concentration of cutting fluids. This  slight manual equipment allows to define in advance any possible failure of technological process.

    REFRACTOMETER AAPLICATION

    Apply 1-2 drops of the Cutting Fluid on the glass surface of the device prism and close by a plastic cap. The concentration will be recorded via embedded viewer.

    Data reading on the  scale. Measurement range is from 0,10 to 0,5%.

    Glass surface should be cleaned with water after every use.

    Help us to make this web-site more informative!

    Please leave your comments about information you want to see on our web-site.

    Send

    Properties and application

    Properties and application

    PROPERTIES OF THE CUTTING FLUID "LABRIA-1"

    SAFETY

    1. Volatile components don't irritate mucous tunic of eyes or respiratory tracts
    2. Sanitary properties correnspond to Russian and world standards
    3. LD50 ~ 5000 mg/kg

    STABILITY

    Concentrate and emulsions possess high physical,chemical, and biological stability.

    FOAMING

    Well matched composition provides absence of foaming.

    ABSENCE OF CORROSION IMPACT

    Stable рН value and additive complex provide high anticorrosion properties of the product.

     

    Concentration of the Cutting Fluid "Labria-1" depends on treatment process

    Screw cutting
    Turning operation
    Milling cut
    Grinding
    5-7% 5-7% 5-7% 2-5%

     


    Physical and chemical properties

    Viscosity, mm2/s, @

    20 0С

    40 0С

     

    120

    47,5

    Mineral oil, % mass., not less  80%
    Density @ 20 ºC, g/cm3 , not more than 0,9 
    PH of concentrated emulsion, % mass., not less 8

    Corrosion effect on metals of 2% emulsion:

    Cast iron SH 21-40

    Copper М2  

    absence

    absence

    Flash temperature of the concentrate product, not less than 200 0С
     Storage and shelf life 

    The Cutting Fluid LABRIA should be stored in original unopened container at -30ºC +40ºC.

    Analogues:
    • Shell Dromus Oil BX;
    • Ratak 6210R, Fuch;

     

    •  Mobilcut 144, Mobil;
    • Syntilo RHS, Castrol.
    The correspondence is confirmed by technological and operational tests.

    Documentation

       

     

    Sanitary and epidemiological certificate

    Valid until 14.05.2014

     

    Release form

    Release form

    Steel drums 200 liters, containers 20 liters.
  • We will be pleased
    if you leave comments
    to our products.